Note: This Wi-Fi Module Is Only Used For 3000W Solar Inverter (Sph302480A) Or 5000W Solar Inverter (Sph5048P) . Installation : 1. Connect The 4Pin Aviation Of The Wi-Fi Plugpro To The Power Cable Aviation Side And Tight It. 2. Connect The Other Side Of Power Cable To The Inverter. 3. Confirm The Status Of The Led Indicator (After Step2.3, When 4 Led Indicators Keep On, Showing The Normal Working Status).

Features Wirelessly monitor and control compatible solar charge controllers via Bluetooth Connect to a user-friendly smartphone app, keep track of your system Embedded exclusive Bluetooth chip with high efficiency and low energy consumption With Bluetooth 4.0 and BLE technology, it features fast and uninterrupted communication Powered directly through RJ12 communication port Signal range reaches up to 50 ft Specifications Model: BT-1 Input Voltage: 5V-12V Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤15m Serial Baud Rate: Fixed Baud Rate 9600bps Cabl

Installation and Wiring-Overview The RS-BM500 shunt should be mounted as close to the battery as possible, and the remote display is intended to be mounted on a wall. Recommended Tools Wrench Drill Jigsaw 2 ring terminals of appropriate size for battery cable Crimp tool for ring terminals Wiring Diagram The following wiring diagram will be referenced in the next section. Installation Before doing anything, disconnect all wires from the negative side of the battery. Cut the negative cable for the battery and crimp on new ring terminals. Alternatively, use a new wire of appropriate gauge to carr

Features High Power Capacity (Cables) Rated for 37.7A / 600V with UL1015-certified 8AWG tin-plated copper wires. Tin-plated conductors ensure stable, corrosion-resistant performance. Remote Control Made Easy Turn the inverter ON/OFF, switch modes, and adjust settings remotely. Clear System Monitoring View real-time voltage and load levels. Instant Alerts LED indicators, fault codes, and buzzer provide quick warning of any issues. Durable & Safe Flame-retardant ABS housing, shock and vibration resistant for tough conditions. Simple Installation The flush-mount design features a plug-and-play RJ

Features Smart Monitoring & Control The real-time LCD shows voltage, current, load, and battery status at a glance. Built-in Bluetooth enables remote mode switching and performance tuning through the RICH SOLAR App. Advanced fault alerts deliver instant LED, audible, and fault code notifications for quick troubleshooting. Continuous & Reliable Power Bypass mode ensures critical appliances stay powered during inverter faults. Smart charging optimizes profiles for AGM, lithium, and user-defined batteries, enhancing efficiency and extending lifespan. Flexible Energy Integration Supports solar PV,

Features Compatible with: RS-V3P12, RS-V3P24, RS-V2P12, RS-V2P24, RS-V1P12 inverters Smart LCD Display Real-time monitoring of inverter voltage, output power, battery, and load status Provides symbol-based fault alerts for quick diagnostics Reliable Wired Control 6 m (19.69 ft) shielded cable with RJ45 connector Free from signal interference for consistent performance User-Friendly & Durable Design Backlit LCD with intuitive interface ensures clear visibility in low light Raised bubble buttons provide tactile feedback for easy control Durable, scratch-resistant construction for long-term use F

Battery Shunt 300 with Bluetooth

RBM500 - 500A Battery Monitor